10 Basic Terminologies Every JCB Equipment Dealer Should Know

JCB machines are used on many construction sites every day. These machines are sold and serviced by trained JCB dealers. The work must be done with full knowledge and care. Knowing the right terms can help dealers work better.

Some terms are often used in machine sales and service. These words must be learned and remembered by every dealer. 

With the right knowledge, better service can be offered to customers. 

This informative piece of article by one of the best JCB equipment dealers explains simple terms used in the JCB world.

Backhoe Loader

A backhoe loader is used on many job sites. It is made for digging, lifting, and loading work. Two main tools are attached to this machine.

A bucket is placed in the front of the loader. A backhoe arm is fitted at the rear end. These tools are used for heavy-duty tasks daily.

This machine is often chosen for its compact size. It can be moved easily between small and large sites.

Hydraulic System

A hydraulic system is used in most JCB machines. Pressure is applied using special fluids for movement. Heavy parts are moved easily with this system.

Strong force is created through hydraulic pressure and flow. Arms, buckets, and booms are lifted using this system. Smooth and fast actions are always ensured.

Hydraulic fluid must be checked at regular time gaps. Leaks and damage should always be repaired without delay.

Operating Weight

The operating weight is measured when the machine is ready. Fuel, oil, and the operator are always included. Attachments and other parts are also counted in it.

It helps in planning machine transport and site movement. Correct weight must be known before sending machines to work. Overloading should always be avoided for safety.

This weight is listed in the machine’s manual guide. It should be checked before using the equipment.

Loader Bucket

A loader bucket is attached to the front side. It is used for lifting and moving loose materials. Soil, sand, and gravel are often carried by it.

Heavy loads can be lifted with ease using this bucket. It is controlled by the machine’s hydraulic system. Smooth movements are provided during loading work.

The bucket should be checked often for damage or cracks. Proper care must be taken to avoid wear.

Quick Coupler

A quick coupler is used to change machine tools. Attachments can be replaced easily without much effort. Less time is taken during tool change on site.

This system is fitted between the arm and the tool. It helps in quick attachment without manual work. Many tools can be used with one machine.

Regular checks should be done to avoid any failure. The locking system must always be kept in place.

Breakout Force

Breakout force is used to break tough ground surfaces. It shows the strength of the arm and bucket. Hard soil and rocks can be broken using this force.

This force is created by the hydraulic system pressure. Strong digging power is always needed at heavy job sites. Breakout force is measured during machine testing.

It should be checked before choosing a machine for work. Better digging results can be gained with higher force.

ROPS (Roll-Over Protection Structure)

ROPS is used to protect the operator during machine rollovers. A strong frame is built around the operator’s seat area. This frame is designed to prevent serious injury.

It is fitted in all modern JCB machines for safety. The cab is kept safe if the machine tips over. Safety rules require ROPS in heavy equipment.

ROPS should be checked for cracks or loose bolts. Damaged parts must be replaced without any delay.

PTO (Power Take-Off)

PTO is used to transfer power from the engine. This power is sent to other tools or attachments. Extra machines can be run using this system.

It is mostly found in farming and utility machines. Tools like pumps or drills are powered by the PTO. Work is made easier with this feature included.

The PTO should be handled with care during use. All safety covers must be kept in place.

Telehandler

A telehandler is used to lift loads very high. A long boom is fitted to reach difficult places. Heavy items are moved with ease using this machine.

It is often used in farming and construction work. Materials can be lifted to rooftops or storage areas. Forks, buckets, and hooks are used as attachments.

The machine must be balanced before lifting heavy loads. Safety checks should always be done before each use.

Service Interval

A service interval is set for regular machine maintenance. It tells when checks and part changes must be done. Engine oil and filters are replaced during this time.

Always explain customers about the best and authorized JCB parts dealer in Sonipat.

Each machine has its own service schedule to follow. Long machine life is ensured by timely servicing and care. Better performance is also gained through regular checks.

The service record should always be updated and kept safe. Missed intervals can cause damage to key parts.